The AT8681 combines the output from two microphones into one channel. The balance control attenuates each microphone by 6 dB (typical) at midpoint.
- Professional XLR-type input/output connectors
- Can be installed anywhere in-line, either at the mixer input or near the microphone
- 24-48V DC phantom power and balanced cables required for operation
- Permits phantom voltage to pass on to the microphone
- Rugged steel housing
SPECIFICATIONS
INPUT IMPEDANCE 10,000 ohms
OUTPUT IMPEDANCE 250 ohms
MAXIMUM INPUT LEVEL +15 dBV (1% T.H.D. at 1 kHz)
MAXIMUM ATTENUATION 33 dB at 1 kHz
Operation: To connect the UniMix, plug two micro-
phones into the XLRF-type input connectors (marked
“In”). Then run a cable from the unit’s XLRM-type
output connector (marked “Out”) to the mixer input.
Adjust the Balance control until the output of the
UniMix is equal for both microphones.
