CMIT-5
SCHOEPS CMIT-5 Shotgun Microphone
Shotguns of Schoeps’ CMIT series combine high sound quality and high directivity.
A shotgun microphone (interference tube) is a higher-order, frequency-dependent directive microphone. It achieves its directivity only from mid frequencies up, while at low frequencies it is comparable to a supercardioid.
Order number 140101 CMIT-5 Shotgun microphone, incl. SG 20, W140, premium case,
Order number 140102 CMIT-5 anthracite-grey, Shotgun microphone, anthracite-grey, incl. SG 20, W 140, premium case. Set including CMIT 5, anthracite-grey, Microphones: Surcharge for custom color,
Order number 140102 CMIT-5 Chroma Green, Shotgun microphone, Chroma Green, incl. SG 20, W 140, premium case. Set including CMIT 5, Chroma Green, Microphones: Surcharge for custom color
Technical Specifications
Pickup pattern |
Supercardioid / lobe-shaped |
Frequency range |
40 Hz - 20 kHz |
Sensitivity |
-35 dB (V/Pa), 18 mV/Pa |
Equivalent noise level (A-weighted) |
13 dB |
Equivalent noise level (CCIR) |
24 dB |
Signal-to-noise ratio (A-weighted) |
81 dB |
Maximum sound pressure level (THD < 0.5 %) |
131 dB-SPL (P48) |
Maximum output voltage |
1.3 V (2.5 dBV) with 1 kΩ load |
High shelf filter |
switchable, +5 dB at 10 kHz |
Low cut filter |
switchable, 80 Hz, 18 dB/oct. |
Proximity filter |
switchable, 300 Hz, 6 dB/oct. |
Minimum recommended load impedance |
1 kΩ |
Output impedance |
50 Ω |
Maximum cable length |
> 400 m |
SCHOEPS RFI Shield |
Yes |
Powering standard / Valid range |
P48 / >34 V |
Current consumption |
4.4 mA (P48) |
Common mode rejection ratio (at 1 kHz) |
> 65 dB |
Output |
XLR-3M, analog, 1 channel |
Length |
251 mm |
Diameter |
21 mm |
Weight |
95 g |
Surface finish |
blue |