ODIN
To see item prices, please log in
RTS ODIN OMNEO digital intercom
The ODIN Digital Intercom is a highly scalable intercom system in a 1RU (Rack Unit) package. As your capacity needs to evolve, a single ODIN can grow from 16 ports to a maximum of 128 ports. A maximum of eight ODIN units can be interconnected via an optical Inter-Frame Link creating a single matrix with up to 1024 ports. The total number of licensed ports may be allocated freely to any port hardware type supported by the unit.
The front panel has been designed to incorporate a User Interface as an alternative option to AZedit that supports the most common setup and configuration tasks. The AZedit and IPedit software applications have been updated to support ODIN.
Featuring connectors for AIO, OMNEO and two-wire technology, ODIN supports keypanel technology going forward and, as always, RTS legacy keypanels. OMNEO is standard on RJ-45 connectors or is available using optional Optical Fiber SFP connectors.
Three flexible redundancy options are available for multiframe ODIN systems: Backup and Restore, Frame Swap and Redundant Frame Operation.
Specifications
| Power Supply: | |
| Type | Locking IE320 C14 style connector (2 connectors, fully redundant load-sharing power supplies) |
| AC Input | 100VAC – 240VAC, 60/50Hz, 0.5A / 0.35A |
| Maximum Power Consumption | 47W (based on 120VAC) Note: Lighted power buttons on front panel control DC voltage feed to internal circuitry; they do not disconnect AC from the internal power supplies. Power cords must be fully removed from unit to safely disengage internal power. |
| Environmental: | |
| Operating Temperature | 32°F – 113°F (0°C – 45°C) |
| Storage Temperature | -4°F – 158°F (-20°C – 70°C) |
| Dimensions: | 19" w/ rack ears (17.3" w/o rack ears) W x 1.7" H x 14.3" D (including connectors) (482.6 mm w/ rack ears [439 mm w/o rack ears] W x 43.7 mm H x 363.5 mm D [including connectors]) |
| Weight: | |
| ODIN Matrix | 11.5lbs (5.2kg) |
| Optional Mounting Bracket | 0.86lbs (390grams) |
| AIO 4-Wire Analog: | |
| Connectors | 16 RJ-45 connectors |
| Signal Format | Differential RX/TX audio with differential RS-485 control data |
| Wiring Scheme | Both 568B & USOC supported |
| A/D and D/A Resolution | 24bits |
| Max Input Level (balanced) | +20dBu w/o clipping |
| Digital Input Gain | Programmable (-20dB – +20 dB) |
| Input Frequency Response | +1dB/-3dB from 200Hz – 20kHz |
| THD+N (8dBu input, unity gain) | 0.025% non-weighted@1kHz <0.075% non-weighted, 100Hz – 20kHz |
| Nominal Input Impedance | >22kΩ |
| Nominal Output Level | 8dBu |
| Digital Output Gain | Programmable (-20dB – 20dB) |
| Maximum Output Level (balanced) @ 600 Ohms | 20 dBu w/o clipping |
| Output Frequency Response | +1dB / -3dB from 200Hz – 20kHz |
| Output Noise Floor | <-70dBu |
| Crosstalk Isolation | >80dB |
| 2-Wire Party Line Analog: | |
| Connector | two 3-pin female XLR connectors |
| Modes/Port supported | RTS CH1, RTS CH2 Audiocom (1 channel) Clear-Com (1 channel) (Connections are DRY. NO dc voltage provided) |
| 4W/2W Echo Return Loss | >30dB |
| Unbalanced Operation (RTS/Clear-Com) | |
| Output Level | 0 dBu (nominal) |
| Expected Termination Impedance | 200 Ω |
| Noise Contribution | <-60 dBu |
| THD+N (w/ nominal input) | <0.5%, 200Hz– 8kHz |
| Bridging Impedance | >10kΩ |
| CALL Signaling | 20kHz (RTS mode) |
| 12VDC (Clear-Com mode) | |
| MIC KILL Signaling 24kHz (RTS mode) | |
| Balanced Operation (Audiocom) | |
| Ouput Level | 0 dBu (nominal) |
| Expected Termination Impedance | 300Ω |
| Noise Contribution | <-60 dBu THD+N |
| (with nominal input) | <0.5%, 200Hz – 8kHz |
| Bridging Impedance | >10 kΩ |
| CALL Signaling | 20kHz (Audiocom mode) |
| MIC KILL Signaling | 24kHz (Audiocom mode) |
| General Purpose Input/Output Ports: | |
| Relays | |
| Type | SPDT |
| Contacts | Common (C) |
| Normally Closed (NC) | |
| Normally Open (NO) | |
| Contact Rating | 1A @ 30 VDC |
| Inputs | |
| Type | Optically Coupled |
| Input Voltage | 5 VDC – 12 VDC on A+ Note: A+ is internally pulled to +5 VDC. Connect K to chassis ground to activate. |
| PAP/LCP/GPIO Port: | |
| Connector | RJ-45 |
| Format | RS-485 control data only (no audio) |
| Inter-Frame Link Port | |
| (2 UPLINK/2 DOWNLINK): Note: Supports expansion and connection of up to eight ODIN frames. |
|
| Fiber Connector Type | Small Form |
| Factor Pluggable (SFP) | |
| Multimode | Finisar FTLF8519P3BNL 500m / 2.125Gbps |
| Single Mode | Finisar FTLF1421P1BTL 15km / 2.67Gbps |
| Speed | 2Gbps |
| LED Indicator | Optical Signal Present Note: SFF-8472 fiber diagnostics supported |
| Control Port: | |
| Connector | RJ-45 |
| Format | IEEE 802.3 compliant |
| Speed | 10/100/1000 Mbps |
| LEDs | Speed and Link/Activity |
| Sync Input Port: | |
| Connector | BNC |
| Termination Impedance | 75 Ω |
| Input Frequency Range | 48 kHz ±25 ppm |
| Input Level | 5V TTL |
| Compatible OMNEO Port (primary and secondary): | |
| Maximum Capacity | 128 Full-duplex ports |
| Copper Connector Type | RJ-45 |
| Format | IEEE 802.3 compliant |
| Copper Ethernet Speed | 100/1000 Mbps |
| Fiber Connector Type | Small Form Factor Pluggable (SFP) |
| Multimode | Finisar FTLF8519P3BNL 500m / 2.125Gbps |
| Single Mode | Finisar FTLF1421P1BTL 15km / 2.67Gbps |
| Fiber Speed | 100/1000Mbps |
| LED Indicator | Optical Signal Present |
| Note: SFF-8472 fiber diagnostics supported | |
| TFT Display: | |
| Active Area | 120.10 mm (wide) x 18.77 mm (high) |
| Dot Resolution | 576 x 90 pixels |
| Color Resolution | 16-bit (64K) RGB color |
| View Angle | 80° (typical, all directions) |
| Protective Lens | Anti-Glare / Anti-Reflective |
| Front Panel Management Port: | |
| Connector | RJ-45 |
| Format | IEEE 802.3 compliant |
| Speed | 10/100/1000 Mbps |
| LEDs | Speed and Link/Activity |
| Agency Compliance: | Emissions (Class A) • EN 55032:2012/AC:2013 • KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79 • AS/NZS CISPR 32:2015 • VCCI-CISPR 32:2016 • ICES-003, Issue 6:2016, Updated April 2017 • FCC Part 15 Subpart B • Chinese National Standard 13438 (2008) Immunity • EN55024:2010 • KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79 Safety • UL 60950-1 and CAN/CSA C22.2 No.60950-1-07 • UL 62368-1 • Japanese PSE compliance |
