KP-5032PB

KP-5032PB

RTS

To see item prices, please log in
Only 0 left!

RTS KP-5032PB  2RU, 32 pushbutton keys

Specifications

LCD Display
Active Area 120.10mm (wide) x 35.86mm (high)
Dot Resolution 576 x 172 pixels
Color Resolution 16-bit (64K)RGB color
View Angle 80 degrees (typical; all directions)
Power Supply
Type External DC
AC Input 100–240VAC 50/60Hz
General Purpose Inputs and Outputs
Outputs
Type (relays) SPDT
Contact Rating 1AMP @ 30VDC
Inputs
Type Optically Coupled
Input Voltage 5-18 VDC on A+
* A+ is internally pulled to 5VDC. Connect K- to to activate.
Inputs
Matrix
Type Balanced
Typical Input Level +8dBu
Typical Input Impedance >10kΩ
Maximum Input Level +20dBu
Supported Bandwidth 100Hz to 20KHz
Aux 1 and Aux 2
Type Balanced
Typical Input Level +8dBu
Typical Input Impedance >10 k Ω
Front Panel Mic
Type Electret
Typical Input Level -42dBu
Typical Input Impedance 1kΩ
Maximum Input Level -25dBu
Rear Panel Mic
Type Electret
Typical Input Level -42dBu
Typical Input Impedance 1kΩ
Maximum Input Level -25dBu
Front and Rear Headset Mic - Electret
Typical Input Level -42dBu
Typical Input Impedance 1kΩ
Maximum Input Level -25dBu
Front and Rear Headset Mic - Dynamic
Typical Input Level -50dBu
Typical Input Impedance 600Ω
Maximum Input Level -25dBu
Outputs
Matrix
Type Balanced
Typical Output Level +8dBu
THD+N% <0.20%
Typical Output Impedance 600Ω
Maximum Output Level +20dBu
Frequency Response 100Hz to 20KHz
MIC/LINE Out
Type Balanced
Typical Output Level +8dBu
THD+N% <0.20%
Typical Output Impedance 600Ω
Maximum Output Level +20dBu
Frequency Response 100Hz to 20KHz
Headset - Front, Rear, Left, Right
Maximum
Output Power 125mW for 32Ω load
Earphone Impedance 16Ω and above
THD+N% <0.20%
Frequency Response 100Hz to 20KHz
Speaker - Rear
Maximum Output Power 5W for 8W load
Speaker Impedance 4Ω and 8Ω
THD+N% <0.20%
Frequency Response 100Hz to 20KHz
Speaker - Front
SPL 84dBSPL for 1kHz sine wave @ 1 meter
Digital
OMNEO Channels
Typical OMNEO Latency 1ms
Frequency Response 20Hz - 20KHz
Environmental
Dimensions 17.39” W(without rack ears) x 3.46” H x 3.88” D
(441.82mm x 87.96mm x 98.5mm
[111.11mm including volume knobs and lever keys])
Weight
KP-5032 4.89lb (2.22kg)
Power Supply 0.53lb (.24kg)
Power Supply
Mounting Bracket 0.30lbs (.14kg)
Temperature
Operating 0° C to 55°C (32°F to 131°F)
Storage -20°C to 70°C (-4°F to 158°F)
Power Consumption
Nominal 13 Watts
Maximum 18 Watts
Maximum Volt Amp 48 VA
Certification CE Compliance
UL Certified

We Also Recommend