DPA 4098-DC-G-B01-045

DPA

To see item prices, please log in
Only 1 left!

4098 CORE Supercardioid Mic, Black, XLR, 47 cm (18 in) Boom, top and bottom Gooseneck

Speech intelligibility - low noise

  • Outstanding audio quality
  • Wireless podium mic capability
  • Highly directional – very isolated
  • High rejection of radio frequency interference
  • Sleek Scandinavian design

DPA gooseneck microphones have quickly become a very popular choice for podium mics as well as for conference room usage as either tabletop or ceiling mount.

Specifications

Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in) MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz, XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
Distortion, THD < 1% - Legacy 122 dB SPL RMS, 125 dB SPL peak
Distortion, THD < 1% - CORE 130 dB SPL RMS, 133 dB SPL peak
Dynamic range - Legacy Typ. 102 dB
Dynamic range - CORE Typ. 110 dB
Max. SPL, THD 10% 135 dB SPL peak
Rated output impedance From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω
Minimum load impedance 2 kΩ
Cable drive capability MicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
XLR-3M: Up to 100 m (328 ft)
Output balance principle Signal balanced with XLR connector or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance) MicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or
P48 (Phantom Power) with DAD6001-BC XLR adapter XLR-3M: P48 (Phantom Power)
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector MicroDot or XLR-3M
Color Black
Weight
Microdot:
16 cm (6 in): 12 g (0.4 oz)
28 cm (11 in): 20 g (0.7 oz)
43 cm (17 in): 28 g (1.0 oz)
77 cm (30 in): 55 g (1.9 oz)
122 cm (48 in): 67 g (2.4 oz)

XLR-3M:
20 cm (8 in): 75 g (2.6 oz)
32 cm (13 in): 80 g (2.8 oz)
47 cm
Microphone diameter 5.7 mm (0.22 in)
Microphone length
Microdot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)
XLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Typical on and off-axis response of DPA 4098

Typical directional characteristics of DPA 4098


Adapters & connectors

DPA's adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to only one wireless system.

>> Microphone adapters

In addition, DPA has # fixed connections available, like LEMO 3 pin, TA4F mini-XLR and Mini-Jack.
Please visit our product configurator to learn more:

>> 4098 Miniature Supercardioid Gooseneck Mic configurator (Floor stand solution)
>> 4098 Miniature Supercardioid Gooseneck Mic configurator (Tabletop & Ceiling solution)