CMIT-5
SCHOEPS CMIT-5 Shotgun Microphone
Shotguns of Schoeps’ CMIT series combine high sound quality and high directivity.
A shotgun microphone (interference tube) is a higher-order, frequency-dependent directive microphone. It achieves its directivity only from mid frequencies up, while at low frequencies it is comparable to a supercardioid.
Order number 140101 CMIT-5 Shotgun microphone, incl. SG 20, W140, premium case,
Order number 140102 CMIT-5 anthracite-grey, Shotgun microphone, anthracite-grey, incl. SG 20, W 140, premium case. Set including CMIT 5, anthracite-grey, Microphones: Surcharge for custom color,
Order number 140102 CMIT-5 Chroma Green, Shotgun microphone, Chroma Green, incl. SG 20, W 140, premium case. Set including CMIT 5, Chroma Green, Microphones: Surcharge for custom color
Technical Specifications
| Pickup pattern |
Supercardioid / lobe-shaped |
| Frequency range |
40 Hz - 20 kHz |
| Sensitivity |
-35 dB (V/Pa), 18 mV/Pa |
| Equivalent noise level (A-weighted) |
13 dB |
| Equivalent noise level (CCIR) |
24 dB |
| Signal-to-noise ratio (A-weighted) |
81 dB |
| Maximum sound pressure level (THD < 0.5 %) |
131 dB-SPL (P48) |
| Maximum output voltage |
1.3 V (2.5 dBV) with 1 kΩ load |
| High shelf filter |
switchable, +5 dB at 10 kHz |
| Low cut filter |
switchable, 80 Hz, 18 dB/oct. |
| Proximity filter |
switchable, 300 Hz, 6 dB/oct. |
| Minimum recommended load impedance |
1 kΩ |
| Output impedance |
50 Ω |
| Maximum cable length |
> 400 m |
| SCHOEPS RFI Shield |
Yes |
| Powering standard / Valid range |
P48 / >34 V |
| Current consumption |
4.4 mA (P48) |
| Common mode rejection ratio (at 1 kHz) |
> 65 dB |
| Output |
XLR-3M, analog, 1 channel |
| Length |
251 mm |
| Diameter |
21 mm |
| Weight |
95 g |
| Surface finish |
blue |
